Creating a project – Sony RM-AX4000 User Manual
Page 87
![background image](/manuals/439730/87/background.png)
Creating a project in Standard mode (New Project Wizard)
Perform the follow ing steps to create a
in Standard mode follow ing the "New Project" w izard instructions.
Ste p 1:
Enter a name for the project you w ant to create.
Ste p 2:
In this step, perform the follow ing steps to set various component settings.
1.
Select all the component types you w ant the Remote Commander to control.
2.
Check or change the label of components.
3.
Program the preset code of a component.
4.
Check if the preset code you programmed w orks.
5.
Repeat steps 3 to 4 for each component you are editing.
Ste p 3:
In this step, perform the follow ing steps to set various settings of
1.
Select the "Purpose" and the "Source component" (that outputs images and sound) of all the XPRESS keys you w ant to program.
2.
Check or change the label of XPRESS keys.
3.
Select a video component (that outputs images from the source component).
4.
Select an audio component (that outputs sound from the source component).
5.
Set the follow ing items about the video component.
o
Select the type of pow er button on the video component's remote control.
o
Set the information about the input select button on the video component's remote control.
o
Make the Remote Commander (RM-AX4000) learn the video component's remote control signal.
6.
Set the follow ing items about the audio component.
o
Select the type of pow er button on the audio component's remote control.
o
Se the information about the input select button on the audio component's remote control.
o
Make the Remote Commander (RM-AX4000) learn the audio component's remote control signal.
7.
Set the follow ing items about the source component.
o
Select the type of pow er button on the source component's remote control.
o
Make the Remote Commander (RM-AX4000) learn the source component's remote control signal.
8.
Set a
(action to be executed w hen operating an XPRESS key) and an
(action to be executed w hen sw itching to another XPRESS
display) of an XPRESS key.
9.
Repeat steps 3 to 8 for each XPRESS key you are setting.
Ste p 4:
Dow nload the s e ttings to the Re m ote Com m ande r
Dow nload the settings made on the w izard to the Remote Commander (RM-AX4000).
Hints
When you start up AX Remote Editor for the first time, the "New Project" w izard appears asking you to create a project. In this case, create a project
follow ing the above procedure.
If you w ant to exit the setting procedure at any point, click "Save and Exit" in the low er right of the screen. The setting is saved and AX Remote Editor
closes.
The next time you start AX Remote Editor, you can resume the setting from the point you stopped.
Page 87