beautypg.com

Sony RM-AX4000 User Manual

Page 106

background image

A

Start macro/Exit macro

for an XPRESS key

The Timer function

The Air-Slide function

A System Control button/key

Hint

AV components may not accept subsequent remote control signals just after they are turned on. Therefore, use the Delay action to set an interval after the
action to turn on an AV component.

Jum p action
An action that jumps to another display.

(Example)

[Jum p] DVD

Jumps to the DVD Component display.

The Jump action can be programmed for the follow ing Action lists:

A key/button on the Component display

A key/button on the XPRESS display

The Timer function

The Air-Slide function

A System Control button/key

Pre s e t action
An action programmed for a key/button, based on the preset code of the component.
For a key/button that has no preset action, you can program a Preset action, selected from the preset code options listed for that component.

(Example)

[Pre s e t] TV - SONY - INPUT2

Adds a Preset action to send the remote control signal of selecting INPUT2 to a Sony brand TV.

You can program a Preset action only for an Action list w ith a key/button on the component display.

Note

You cannot add a Preset action to an Action list for a key/button that already has a Preset action or Learn action.

Le arn (Le arn+) action
An action set w hen a key or a button has learned a remote control signal of an AV component.

(Example)

[Le arn] 1 Le arn Code (s )

Performs the learned action.

You can add a Learn action to an Action list w ith a key/button that already has a Preset action or Learn action.

You can program up to four Learn actions (or Learn+ actions) to one key/button. If you taught several remote control signals to one key/button, the signal is
sent in the order in w hich the signal is taught, w ith each press of the key/button.

Hint

If you teach remote control signals to a key that does not have the Preset action, the Learn action is added. If you teach to a key that has the Preset action,
the Learn+ action is added instead of the Preset action.

Alias action
An Alias action refers to and performs actions programmed for other keys and buttons. When you program an Alias action, select the component or
function you w ant to refer to, then select the key/button you w ant to perform the action.

(Example)

[Alias ] TV - POWER ON

Refers to the TV POWER key of the TV Component display.

The Alias action can be programmed for the follow ing Action lists:

A key/button on the Component display

A key/button on the XPRESS display

A

Start macro/Exit macro

for an XPRESS key

The Timer function

The Air-Slide function

A System Control button/key

Note s

If the reference sequence loops, a message appears and the Alias action cannot be set. For further details, see "

About alias loops

" below .

If the XPRESS function is set as an Alias action, Exit Macro w ill not w ork.

About alias loops

If tw o or more keys have Alias actions that refer to each other, the operation repeats endlessly. This kind of reference is called an "alias loop."
For example, if key A and B have Action lists as follow s:

Page 106