About editing action lists, Action list, For a key/button. there is also a wide range – Sony RM-AX4000 User Manual
Page 105
![background image](/manuals/439730/105/background.png)
About editing Action lists
Actions that can be added to an Action list
What is an Action list?
The Remote Commander (RM-AX4000) allow s you to program an action procedure for individual keys or buttons. A series of actions programmed for a key or
button is called an "Action list." Several actions are performed sequentially, just by pressing the key or button.
Example of an Action list
For example, if you program the follow ing actions for a key to select channel 123 for TV, these operations are performed automatically in sequence by simply
pressing one key.
1.
Turn on the TV.
2.
Press "1" on the TV's remote control.
3.
Press "2" on the TV's remote control.
4.
Press "3" on the TV's remote control.
5.
Press the "Enter" key on the TV's remote control.
The above actions are programmed as the Action list show n below .
The processes (actions) of "pow er on," and "pressing the number key," and "pressing the Enter key" are usually preset to specific keys on a component. To
add these kinds of actions to an Action list, refer to the actions of existing keys using Alias actions - (1), (3), (4), (5), and (6).
Note that AV components may not accept subsequent remote control signals immediately after pow ering on. Therefore, use the Delay action command - (2) -
to set an interval after the pow er on action that turns an AV component on.
Hint
You can also change the order of the Action list, rather than inserting a Delay action command.
Using the follow ing list as an example, if you rearrange the action order, the Delay actions can be omitted because the remote control signal is not sent to the
same AV component consecutively.
(Exam ple of w he n the De lay action is ne e de d)
1.
Turn on the TV.
2.
Set the input selector of the TV to VIDEO1.
3.
Turn on the amplifier/receiver.
4.
Set the input selector of the amplifier/receiver to DVD.
5.
Turn on the DVD player.
6.
Start DVD playback.
(Exam ple of w he n the De lay action is om itte d)
1.
Turn on the amplifier/receiver.
2.
Turn on the TV.
3.
Turn on the DVD.
4.
Set the input selector of the amplifier/receiver to DVD.
5.
Set the input selector of the TV to VIDEO1.
6.
Start DVD playback.
Actions that can be added to an Action list
You can program the follow ing five types of actions to an Action list:
De lay action
An action that sets an interval (delay time) betw een actions. The delay time ranges from 0.1 to 60.0 seconds.
(Example)
[De lay] 0.5 s e c
Sets an interval of 0.5 seconds (delay time) betw een actions.
You can program a Delay action for the follow ing Action lists:
A key/button on the Component display
A key/button on the XPRESS display
Page 105