Nikon D7000 User Manual
Page 73
53
x
7
Exit live view mode.
Rotate the live view switch to exit live view mode.
A
Live View/Movie Recording Display Options
Press the
R button to cycle through display options as shown below.
Show photo indicators
Show movie indicators
*
Hide all indicators
*
Virtual horizon
*
Framing grid
*
* A crop showing the area recorded is displayed during movie recording when frame sizes
other than 640 × 424 are selected for Movie settings > Movie quality in the shooting
menu (
0 60; when movie indicators are displayed, the area outside the crop is greyed
out).
A
Flicker
You may notice flicker or banding in the monitor during live view or when shooting movies
under certain types of lighting, such as fluorescent or mercury-vapor lamps. Flicker and
banding can be reduced by choosing a Flicker reduction option that matches the
frequency of the local AC power supply (
0 237).
A
Exposure
Depending on the scene, exposure may differ from that which would be obtained when live
view is not used. Metering in live view is adjusted to suit the live view display, producing
photographs with exposure close to what is seen in the monitor. In P, S, A, and M modes,
exposure can be adjusted by ±5 EV (
0 107). Note that the effects of values over +3 EV or
under –3 EV can not be previewed in the monitor.
Live view switch