E2: flash shutter speed, E3: flash cntrl for built-in flash, Flash control at 1/320 s (auto fp) – Nikon D7000 User Manual
Page 243
223
U
❚❚Flash Control at 1/320 s (Auto FP)
When 1/320 s (Auto FP) is selected for Custom Setting e1 (Flash sync speed,
0 222), the built-in flash can be used at shutter speeds as fast as
1
/
320
s, while
optional SB-900, SB-800, SB-700, SB-600, and SB-R200 flash units can be used at any
shutter speed (Auto FP High-Speed Sync).
This option determines the slowest shutter speed available
when front- or rear-curtain sync or red-eye reduction is used in
mode P or A (regardless of the setting chosen, shutter speeds
can be as slow as 30 s in S and M modes or at flash settings of
slow sync, slow rear-curtain sync, or red-eye reduction with slow
sync). Options range from
1
/
60
s (1/60 s) to 30 s (30 s).
Choose the flash mode for the built-in flash.
Flash sync speed
1/320 s (Auto FP)
1/250 s (Auto FP)
1/250 s
Shutter speed
Built-in flash
Optional flash
unit
Built-in flash
Optional flash
unit
Built-in flash
Optional flash
unit
1
/
8,000
–
1
/
320
s
—
Auto FP
—
Auto FP
—
—
1
/
320
–
1
/
250
s
Flash sync
*
—
Auto FP
—
—
1
/
250
–30 s
Flash sync
* Flash range drops as shutter speed increases. Flash range will nevertheless be greater than
that obtained at the same speeds with Auto FP.
D
The Flash-Ready Indicator
When the flash fires at full power, the flash-indicator in the camera viewfinder will blink to
warn that the resulting photograph may be underexposed. Note that the flash-ready
indicators on optional flash units will not display this warning when 1/320 s (Auto FP) is
selected.
e2: Flash Shutter Speed
G button
➜ A Custom Settings menu
e3: Flash Cntrl for Built-in Flash
G button
➜ A Custom Settings menu
Option
Description
1 TTL
Flash output is adjusted automatically in response to shooting
conditions.
2 Manual
Choose the flash level (
0 224). The camera does not emit monitor pre-
flashes.
3 Repeating flash
The flash fires repeatedly while the shutter is open, producing a strobe-
light effect (
0 224).
4 Commander mode
Use the built-in flash as a master flash controlling one or more remote
optional flash units (
0 225).