Shooting (p, s, a, m) – Nikon D7000 User Manual

Page 322

302

Shooting (P, S, A, M)

Shutter-release disabled

• Non-CPU lens is attached: rotate camera mode dial to A or M (

0 270).

• Mode dial rotated to S after shutter speed of

A selected in mode M: choose new shutter

speed (

0 69).

Camera is slow to respond to shutter-release button

: Select Off for Custom Setting d11 (Exposure

delay mode;

0 219).

Full range of shutter speeds not available

• Flash in use. Flash sync speed can be selected using Custom Setting e1 (Flash sync speed);

when using optional SB-900, SB-800, SB-700, SB-600, or SB-R200 flash unit, choose 1/320 s
(Auto FP) or 1/250 s (Auto FP) for full range of shutter speeds (

0 222).

• When On is selected for Movie options > Manual movie settings in the shooting menu,

shutter speed can be set to values between

8000

s and

s (

0 60).

Colors are unnatural

• Adjust white balance to match light source (

0 117).

• Adjust Set Picture Control settings (

0 131).

Can not measure white balance

: Subject is too dark or too bright (

0 125).

Image can not be selected as source for preset white balance

: Image was not created with D7000

(

0 126).

White balance bracketing unavailable

• NEF (RAW) or NEF+JPEG image quality option selected for image quality (

0 85).

• Multiple exposure mode is in effect (

0 154).

Effects of Picture Control differ from image to image

: A (auto) is selected for sharpening, contrast, or

saturation. For consistent results over a series of photos, choose another setting (

0 134).

Metering can not be changed

: Autoexposure lock is in effect (

0 106).

Exposure compensation can not be used

: Choose mode P, S, or A (

0 68, 69, 70).

Noise (reddish areas or other artifacts) appears in long time-exposures

: Enable long exposure noise

reduction (

0 205).