Brother PocketJet PJ-673 w WLAN - Manual (Page 40)

Chapter 2
36
No Feed Mode Extra Feed
2
Available settings: [None], [1/2 inch (12.7
mm)], [1 inch (25.4 mm)], [1-1/2 inches
(38.1 mm)], [2 inches (50.8 mm)]
Default setting: [1 inch (25.4 mm)]
This option is used when [Page Feed Mode]
is set to [No Feed]. Paper is ejected after the
last page of the document according to the
setting.
NOTE
This option only affects the last page of a
document. The bottom margin specified
by the computer program has no effect,
and the top margin determines the total
top and bottom margin between pages of
a multi-page document.
Roll Paper Pause
2
Available settings: [Disable], [Enable]
Default setting: [Disable]
This option is used to display a confirmation
message for each page when printing on roll
paper.
Dash Line Print
2
Available settings: [Disable], [Enable]
Default setting: [Disable]
This option is used to print perforation lines
between pages, useful when printing on roll
paper. When [Enable] is selected, set [Page
Feed Mode] to [Fixed Page]. Note that
perforation lines are printed on the paper;
they are not punched into the paper.
Automatically Switch
Command Mode
2
Available settings: [Disable], [Enable]
Default setting: [Enable]
Select whether or not the mode switching
command is automatically sent when the
commands are switched while using the
printer.
Feed Position for Custom
Paper
2
Available settings: [Center], [Left]
Default setting: [Center]
Select the paper feed position for printing on
custom paper.