Innotech iSEA - Manual (Page 10)

Innotech Service & Event Analyser Installation Instructions
Page 10 © Mass Electronics Pty Ltd 2011 Edition 3.1 dated 26.03.2014
1-1 Introduction
This manual is intended to provide the customer with complete and comprehensive documentation
to set up and configure the Innotech Service and Event Analyser (iSEA) on a Building Management
System (BMS) computer.
iSEA is a Windows® based application that resides in the system tray. Its main purpose is to provide
notifications to the user of events that occur in Innotech Service based applications that may not
have a dedicated application status monitoring tool, such as Chronicle Server. It also facilitates
restarting Innotech services if they are unexpectedly terminated, in order to reduce the need for
human intervention.
Customers should familiarise themselves with the content of this manual before attempting
installation and setup of iSEA on their computer.
Throughout this manual there are icons to illustrate notes and points of caution, as illustrated below:
1-1.1 Systems Covered by this Manual
The manual covers the preparation and configuration of iSEA and its features for use with the
Innotech Chronicle and iComm server programs.
1-1.2 Scope of this Technical Manual
This technical manual contains the following Chapters:
Chapter Name Description
Chapter 1 - Preliminary Information
Contains initialisation related information
of a general nature such as computer
requirements and pre-installation materials.
Chapter 2 - Functionality of iSEA
Contains information about the various
features of iSEA.
Chapter 3 - Configuring iSEA
Contains instructions for configuring the
various features within iSEA.
Table 1-1: Chapter List
These notices indicate a piece of useful information which should be read.
These notices contain information about the software that must be done before proceeding further to ensure
success.
IMPORTANT