IEI Integration HDC-3x-Series_SDK_Linux - Manual (Page 22)

HDC-3x Series SDK (Linux)
Page 22
fmb-0?>video1.mpg
Step 11: The following message shows.
[[[ Decode settings - Sub menu -> Input port -> File -> Start position ]]]
‘Z’<-~~~~~~~~~~~~~~->Enter
Input start position in byte.
Current value is 0 (Max.18474912)
fmb-0?>
Step 12: Setup the start point to decode the video. Type 0 to decode the video from the
beginning.
fmb-0?>0
Step 13: The decoding setting sub menu shows. The file name has been changed to
“video1.mpg”.
< Decode settings - Sub menu >
‘Z’<-~~~~~~~~
Select following number. (Current settings)
1 Input port setting (File video1.mpg)
2 Video resolution setting (1920x1080_59.94i)
3 Audio format (MPEG1L2)
fmb-0?>
Step 14: Configure video resolution settings. Type 2 to select “Video resolution
setting” to configure the video resolution.
fmb-0?>2
Step 15: When the following message shows, select the resolution of the video which will
be decoded. Step 0:
[[[ Decode settings - Sub menu -> Video resolution ]]]
‘Z’<-~~~~~~~~~~~~~~~->Enter
Select following number.