IEI Integration HDC-3x-Series_SDK_Linux - Manual (Page 17)

HDC-3x Series SDK (Linux)
Page 17
Step 18: Configure the video bitrate. To configure the video bitrate, type 3 to select the
“Video bitrate setting”.
fmb-0?>3
Step 19: The following message shows.
[[[ Encode settings - Sub menu -> Video ratecontrol -> Video bitrate ]]]
‘Z’<-~~~~~~~~~~~~~~~~~->Enter
Select following number. (* is current setting)
1 * CBR
2 VBR
fmb-0?>
Step 20: To configure the video bitrate as CBR, type 1 to select “CBR”. To configure the
video bitrate as VBR, type 2 to select “VBR”. Now we take CBR as an example.
fmb-0?>1
Step 21: The following message shows the current CBR value.
[[[ Encode settings - Sub menu -> Video rate control -> Video bitrate ]]]
‘Z’<-~~~~~~~~~~~~~->Enter
Input bitrate in kbps. (6000kbps -- 24000kbps(I) or 30000kbps(P))
Current value is 6000kbps.
fmb-0?>
Step 22: To change the value, enter a bitrate. Step 0:
fmb-0?>24000
< Encode settings - Sub menu >
‘Z’<-~~~~~~~~
Select following number. (Current settings)
1 Output port setting (File video1.mpg)
2 Video resolution setting (1920x1080_59.94p)
3 Video bitrate setting (CBR, 24000kbps)
4 Audio format (MPEG1L2, 256kbps)