IEI Integration HDC-3x-Series_SDK_Linux - Manual (Page 11)

HDC-3x Series SDK (Linux)
Page 11
8 Video I/O settings
9 Exit
fmb-0?>
The contents marked in blue are especially for the HDC-302E and the HDC-304E
video capture cards.
1.5 Video Capture
There two main procedures to capture video by the HDCapture SDK in Linux. First, setup
the encoding setting. Second, start capturing video. These two procedures are described
in the following sections.
1.5.1 Encoding Setting
Before capturing the video, please connect the hardware and follow the instruction below
to configure the encoding settings.
Step 1: Launch the HDCapture SDK (refer to Section 1.4).
Step 2: Type 6 to select “6 Encode settings” from the main menu.
fmb-0?>6
Step 3: The following message shows.
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
< Device list >
Select following number.
1 /dev/h55fmb0
2 /dev/h55fmb1
3 /dev/h55fmb2
4 /dev/h55fmb3