IEI Integration HDC-3x-Series_SDK_Linux - Manual (Page 18)

HDC-3x Series SDK (Linux)
Page 18
5 Video scale (Not Use)
fmb-0?>
NOTE:
The audio format of the encoding and decoding settings is set by
default and can not be changed.
1.5.2 Encoding
After configuring encoding settings, the user can start capturing the video by following the
steps below.
Step 1: Access to the main menu. Type 1 to select “1 Encoding” from the main menu.
fmb-0?>1
Step 2: The following message shows. The option marked with * is the selected port for
capturing video. The unsupported port appears with an “unknown” message.
Type the port number to select or deselect the port. In this example, port 1 is
selected.
< Device list >
‘Z’<-~~~~~~~~
Select following number. (* is current setting)
1 <*> /dev/h55fmb0 link : [email protected]
2 < > /dev/h55fmb1 no link : unknown
3 < > /dev/h55fmb2 link : [email protected]
4 < > /dev/h55fmb3 no link : unknown
y Ok
z Return
fmb-0?>