IAI America RCM-P - Manual (Page 56)

48
8-9-2 Software Reset
Resets the software (re-start up the controller).
* Version V2.00 or later make available the software reset function.
It is ready for models of PCON, ACON, SCON, RCP2, ERC and ERC2.
Slct Mode/M2 A. 00
* User Adjust
User Adjust A. 00
Adjust 4
Input 4 into the adjustment number, and press the
Return key.
Soft Reset A. 00
* Reset? Y
Æ 1 N Æ 0
When performing the software reset, press the
key.
(When interrupting the software reset, press the
key. The screen returns to the mode select screen.)
Soft Reset A. 00
* Srv OFF? Y
Æ 1 N Æ 0
During servo on, if pressing the key, a message
“Srv OFF?” appears on the full screen.
(When interrupting the software reset, press the
key. The screen returns to the mode select screen.)
Soft Reset A. 00
Please Wait. Y
Æ 1 N Æ 0
A message “Please wait.” appears, and the software
reset is carried out.
After carrying out, the screen returns to the mode
select screen.
In the mode select screen, using the keys,
select User Adjustment, and then press the Return
key.