Alcatel Carrier Internetworking Solutions OmniStack 6300-24 - Manual (Page 372)

Command Line Interface
4-160
4
Example
show mac-address-table aging-time
This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Spanning Tree Commands
This section includes commands that configure the Spanning Tree Algorithm (STA)
globally for the switch, and commands that configure STA for the selected interface.
Console(config)#mac-address-table aging-time 100
Console(config)#
Console#show mac-address-table aging-time
Aging time: 300 sec.
Console#
Table 4-53. Spanning Tree Commands
Command Function Mode Page
spanning-tree Enables the spanning tree protocol GC 4-161
spanning-tree mode Configures STP, RSTP or MSTP mode GC 4-162
spanning-tree forward-time Configures the spanning tree bridge forward time GC 4-163
spanning-tree hello-time Configures the spanning tree bridge hello time GC 4-164
spanning-tree max-age Configures the spanning tree bridge maximum age GC 4-164
spanning-tree priority Configures the spanning tree bridge priority GC 4-165
spanning-tree
path-cost method
Configures the path cost method for RSTP/MSTP GC 4-166
spanning-tree
transmission-limit
Configures the transmission limit for RSTP/MSTP GC 4-166
spanning-tree
mst-configuration
Changes to MSTP configuration mode GC 4-167
mst vlan Adds VLANs to a spanning tree instance MST 4-167
mst priority Configures the priority of a spanning tree instance MST 4-168
name Configures the name for the multiple spanning tree MST 4-169
revision Configures the revision number for the multiple spanning
tree
MST 4-169
max-hops Configures the maximum number of hops allowed in the
region before a BPDU is discarded
MST 4-170