Alcatel Carrier Internetworking Solutions OmniStack 6300-24 - Manual (Page 236)

Command Line Interface
4-24
4
Device Designation Commands
prompt
This command customizes the CLI prompt. Use the no form to restore the default
prompt.
Syntax
prompt string
no prompt
string - Any alphanumeric string to use for the CLI prompt. (Maximum
length: 255 characters)
Default Setting
Console
Command Mode
Global Configuration
Example
IP Filter Configures IP addresses that are allowed management access 4-27
Web Server Enables management access via a Web browser 4-29
Secure Shell Provides secure replacement for Telnet 4-32
Event Logging Controls logging of error messages 4-41
SMTP Alerts Configures SMTP email alerts 4-46
Time (System Clock) Sets the system clock automatically via NTP/SNTP server or manually 4-50
System Status Displays system configuration, active managers, and version information 4-54
Frame Size Enables support for jumbo frames 4-61
Table 4-8. Device Designation Commands
Command Function Mode Page
prompt Customizes the prompt used in PE and NE mode GC 4-24
hostname Specifies the host name for the switch GC 4-25
snmp-server contact Sets the system contact string GC 4-110
snmp-server location Sets the system location string GC 4-110
Console(config)#prompt RD2
RD2(config)#
Table 4-7. System Management Commands
Command Group Function Page