Smtp alert commands, Table 4-19, Remote logging parameters – Alcatel Carrier Internetworking Solutions OmniStack 6300-24 User Manual
Page 258: Table 4-20, Table 4-18, System logging parameters

Command Line Interface
4-46
4
The following example displays settings for the trap function.
Related Commands
SMTP Alert Commands
Configures SMTP event handling, and forwarding of alert messages to the specified
SMTP servers and email recipients.
Table 4-18. System Logging Parameters
Field
Description
Syslog logging
Shows if system logging has been enabled via the logging on command.
History logging in FLASH The message level(s) reported based on the logging history command.
History logging in RAM
The message level(s) reported based on the logging history command.
Messages
Any system and event messages stored in memory.
Console#show logging trap
Syslog logging: Enabled
REMOTELOG status: Enabled
REMOTELOG facility type: local use 7
REMOTELOG level type: Informational messages only
REMOTELOG server IP address: 192.168.1.6
REMOTELOG server IP address: 192.168.1.7
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#
Table 4-19. Remote Logging Parameters
Field
Description
Syslog logging
Shows if system logging has been enabled via the logging on command.
REMOTELOG status
Shows if remote logging has been enabled via the logging trap command.
REMOTELOG
facility type
The facility type for remote logging of syslog messages as specified in the logging
facility command.
REMOTELOG level type The severity threshold for syslog messages sent to a remote server as specified in
the logging trap command.
REMOTELOG
server IP address
The address of syslog servers as specified in the logging host command.
Table 4-20. SMTP Alert Commands
Command
Function
Mode
Page
logging sendmail host
SMTP servers to receive alert messages
GC
logging sendmail level
Severity threshold used to trigger alert messages
GC
logging sendmail
source-email
Email address used for “From” field of alert messages
GC
logging sendmail
destination-email
Email recipients of alert messages
GC