GxT Ferret 94 Mulitmeter - Manual (Page 2)

2
Introduction
The Meter is a handheld, battery operated instrument that is designated and
tested according to IEC Publication 1010-1 (EN 61010-1) (Overvoltage Category
II), The EMC Directive (EN 50081-1 AND EN 50082-1) , UL 1244, CSA C22.2
No. 231 and ISA-DS82.
Specifications
Display: Digital, LCD, 2000 Count, Updates 3 times/
second
Fuse Protection: 2A 600V High Energy/Fast Fuse
15A 600V High Energy/Fast Fuse
Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Operating Temperature: 0°C to 45°C (32°F to 95°F)
Relative Humidity:
0% to 80% (0°C to 35°C; 32°F to 113°F)
0% to 70% (35°C to 45°C; 95°F to 113°F)
Temperature Coefficient: 0.10 x (Specified Accuracy/°C
Battery Type:
9V, NEDA 1604 or IEC 6LR61
Battery Life: 350 Hours typical (alkaline)
Size (H x W x L): Meter Only 4.0cm x 8.5cm x 19.0cm
With Holster 5.4cm x 10.3cm x 20.8cm
Weight: Meter Only 380g
With Holster 655g
Vibration & Shock: Designed to MIL-T-28800 for a Class II
Instrument
Service & Technical Support
Questions or inquiries about service can be answered by contacting Ferret
at:
Ferret Instruments, Inc., 1310 Higgins Drive, Cheboygan, MI 49721
(231) 627-5664, Fax (231) 627-2727, Toll Free (800) 627-5655.
Battery Replacement
The Meter uses a 9V battery (NEDA 1604 or IEC 6F22). To replace the battery,
remove the two screws of the battery compartment from the back of the Meter
and lift off the cover of the compartment. Replace the battery. Reattach the
battery compartment to the back of the Meter, and reinstall the screws.