Gardner Bender B400 Series Eegor Hydraulic Benders - Manual (Page 12)

12
PARTS AND SERVICE: For quality workmanship and
genuine Gardner Bender parts, select an Authorized
GB Service Center for your repair needs. Only repairs
performed by an Authorized Service Center displaying
the official GB Authorized sign are backed with full
factory warranty. Contact GB Electrical (414)352-4160
for the name of the nearest GB Authorized Service
Center. WARRANTY: Gardner Bender warrants its product
against defects in workmanship and materials for 1
year from date of delivery to user. Chain is not
warranted. Warranty does not cover ordinary wear and
tear, abuse, misuse, overloading, altered products or
use of improper fluid. WARRANTY RETURN PROCEDURE: When
question of warranty claim arises, send the unit to the
nearest GB Authorized Service Center for inspection,
transportation prepaid. Furnish evidence of purchase
date. If the claim comes under the terms of our
warranty the Authorized Service Center will REPAIR
OR REPLACE PARTS AFFECTED and return the unit
prepaid.
REPAIR AND SERVICE INSTRUCTIONS: For repair service and parts contact your nearest Gardner Bender Service Center. The
Gardner Bender Service Center will provide complete and prompt service on all Gardner Bender products.
Gardner
Bender
RPS-0023 0510
To Make an Offset Bend:
1. Make first mark at location determined either by edge of obstacle or
by following “Kick Bend Instruction for Eegor ® Benders” (page 11).
2. From the “Offset Chart” for the size of conduit to be bent, obtain
measurement (B) for offset height (H) and bend angle desired.
3. Make second mark at distance (B) beyond first mark and on opposite side of conduit as
illustrated above.
4. Place conduit in Eegor ® bender with first mark aligned with leading edge of U-strap (see figure above) and
make first bend to the desired angle.
5. Advance the bent conduit through the frame assembly of the Eegor ® bender and rotate the conduit 180°, so
the second mark aligns with the leading edge of the U-strap.
6. Complete offset by making second bend to the exact same angle as the first bend.
Desired Measurement (B)
Offset (H) (inches)
(inches) 15° 30° 45° 60°
2 7 5 ⁄ 8 – – –
4 15 5 ⁄ 16 – – –
6 23 1 ⁄ 16 11 5 ⁄ 8 – –
8 30 3 ⁄ 4 15 5 ⁄ 8 – –
10 38 1 ⁄ 2 19 5 ⁄ 8 13 1 ⁄ 4 –
12 46 1 ⁄ 4 23 5 ⁄ 8 16 1 ⁄ 16 –
14 53 15 ⁄ 16 27 5 ⁄ 8 18 7 ⁄ 8 –
16 61 11 ⁄ 16 31 5 ⁄ 8 21 3 ⁄ 4 16 5 ⁄ 8
18 69 7 ⁄ 16 35 5 ⁄ 8 24 9 ⁄ 16 18 15 ⁄ 16
20 77 1 ⁄ 8 39 5 ⁄ 8 27 3 ⁄ 8 21 1 ⁄ 4
22 84 7 ⁄ 8 43 5 ⁄ 8 30 3 ⁄ 16 23 1 ⁄ 2
24 92 5 ⁄ 8 47 5 ⁄ 8 33 1 ⁄ 16 25 13 ⁄ 16
26 100 5 ⁄ 16 51 5 ⁄ 8 35 7 ⁄ 8 28 1 ⁄ 8
28 108 1 ⁄ 16 55 5 ⁄ 8 38 11 ⁄ 16 30 7 ⁄ 16
30 115 3 ⁄ 4 59 5 ⁄ 8 41 1 ⁄ 2 32 3 ⁄ 4
Desired Measurement (B)
Offset (H) (inches)
(inches) 15° 30° 45° 60°
2 7 9 ⁄ 16 – – –
4 15 5 ⁄ 16 – – –
6 23 – – –
8 30 3 ⁄ 4 15 1 ⁄ 2 – –
10 38 1 ⁄ 2 19 1 ⁄ 2 – –
12 46 3 ⁄ 16 23 1 ⁄ 2 – –
14 53 15 ⁄ 16 27 1 ⁄ 2 18 5 ⁄ 8 –
16 61 11 ⁄ 16 31 1 ⁄ 2 21 1 ⁄ 2 –
18 69 3 ⁄ 8 35 1 ⁄ 2 24 5 ⁄ 16 –
20 77 1 ⁄ 8 39 1 ⁄ 2 27 1 ⁄ 8 –
22 84 7 ⁄ 8 43 1 ⁄ 2 28 15 ⁄ 16 –
24 92 9 ⁄ 16 47 1 ⁄ 2 32 13 ⁄ 16 25 1 ⁄ 4
26 100 5 ⁄ 16 51 1 ⁄ 2 35 5 ⁄ 8 27 9 ⁄ 16
28 108 55 1 ⁄ 2 38 7 ⁄ 16 29 7 ⁄ 8
30 115 3 ⁄ 4 59 1 ⁄ 2 41 1 ⁄ 4 32 3 ⁄ 16
Desired Measurement (B)
Offset (H) (inches)
(inches) 15° 30° 45° 60°
4 15 5 ⁄ 16 – – –
6 23 – – –
8 30 3 ⁄ 4 – – –
10 38 7 ⁄ 16 19 7 ⁄ 16 – –
12 46 3 ⁄ 16 23 7 ⁄ 16 – –
14 53 15 ⁄ 16 27 7 ⁄ 16 – –
16 61 5 ⁄ 8 31 7 ⁄ 16 21 5 ⁄ 16 –
18 69 3 ⁄ 8 35 7 ⁄ 16 24 1 ⁄ 8 –
20 77 1 ⁄ 8 39 7 ⁄ 16 27 –
22 84 13 ⁄ 16 43 7 ⁄ 16 29 13 ⁄ 16 –
24 92 9 ⁄ 16 47 7 ⁄ 16 32 5 ⁄ 8 24 15 ⁄ 16
26 100 5 ⁄ 16 51 7 ⁄ 16 35 7 ⁄ 16 27 1 ⁄ 4
28 108 55 7 ⁄ 16 38 5 ⁄ 16 29 9 ⁄ 16
30 115 3 ⁄ 4 59 7 ⁄ 16 41 1 ⁄ 8 31 7 ⁄ 8
Desired Measurement (B)
Offset (H) (inches)
(inches) 15° 30° 45° 60°
2 7 5 ⁄ 8 – – –
4 15 3 ⁄ 8 – – –
6 23 1 ⁄ 16 11 11 ⁄ 16 – –
8 30 13 ⁄ 16 15 11 ⁄ 16 – –
10 38 1 ⁄ 2 19 11 ⁄ 16 13 7 ⁄ 16 –
12 46 1 ⁄ 4 23 11 ⁄ 16 16 1 ⁄ 4 –
14 54 27 11 ⁄ 16 19 1 ⁄ 16 14 5 ⁄ 8
16 61 11 ⁄ 16 31 11 ⁄ 16 21 7 ⁄ 8 16 15 ⁄ 16
18 69 7 ⁄ 16 35 11 ⁄ 16 24 3 ⁄ 4 19 1 ⁄ 4
20 77 3 ⁄ 16 39 11 ⁄ 16 27 9 ⁄ 16 21 9 ⁄ 16
22 84 7 ⁄ 8 43 11 ⁄ 16 30 3 ⁄ 8 23 7 ⁄ 8
24 92 5 ⁄ 8 47 11 ⁄ 16 33 3 ⁄ 16 26 3 ⁄ 16
26 100 3 ⁄ 8 51 11 ⁄ 16 36 1 ⁄ 16 28 1 ⁄ 2
28 108 1 ⁄ 16 55 11 ⁄ 16 38 7 ⁄ 8 30 13 ⁄ 16
30 115 13 ⁄ 16 59 11 ⁄ 16 41 11 ⁄ 16 33 1 ⁄ 8
2 1 ⁄ 2 " Conduit Offset Chart
3" Conduit Offset Chart 3 1 ⁄ 2 " Conduit Offset Chart 4" Conduit Offset Chart
Offset
or
Rise (H)
Angle
B
B
2nd Mark
1st Mark (on other side of conduit)
P.O. Box 3241 • Milwaukee, WI 53201-3241 • Phone: (414) 352-4160 • FAX (414) 352-2377