Gardner Bender BF150 Roller Support - Manual

BF44 ROLLER SHAFT
( put lube on shaft ) 1 1
/ 2 ” EMT ROLLER SUPPORT
Gardner
Bender
Instruction
Sheet
IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping
damage is found, notify carrier at once. Shipping damage is NOT covered by warranty. The carrier is responsible for
all repair or replacement costs resulting from damage in shipment.
IMPORTANT USER SAFETY AND PROTECTION: In setting up systems to fit your operations, care must be taken to
select the proper components and design to insure appropriate integration with your operations and existing
equipment and that all safety measures have been taken to avoid the risk of personal injury and property damage
from your application or system.
GB ELECTRICAL, INC. CANNOT BE HELD RESPONSIBLE FOR DAMAGE OR INJURY CAUSED BY UNSAFE
USE, MAINTENANCE OR APPLICATION OF ITS PRODUCTS. Please contact GB's technical service department
for assistance if you are in doubt as to the proper safety precautions essential to designing and setting up your
particular application.
Works with BT12515 1 1 / 2 " EMT shoe on Mechanical Sidewinder Bender.
1. Slide roller support on shaft and line up with 1 1 / 2 " EMT shoe groove.
2. Slide 1 1 / 2 " EMT over roller and into shoe. Lock conduit to shoe with jaw.
3. You should now be ready to bend.
BF150
Roller Support
WARRANTY: Gardner Bender warrants its product
against defects in workmanship and materials for 1
year from date of delivery to user. Chain is not
warranted. Warranty does not cover ordinary wear
and tear, abuse, misuse, overloading, altered
products or use of improper fluid. WARRANTY RETURN PROCEDURE: When question
of warranty claim arises, send the unit to the nearest
Gardner Bender Authorized Service Center for
inspection, transportation prepaid. Furnish evidence of
purchase date. If the claim comes under the terms of
our warranty the Authorized Service Center will REPAIR
OR REPLACE PARTS AFFECTED and return the unit
prepaid. PARTS AND SERVICE: For quality workmanship and
genuine Gardner Bender parts, select an Authorized
Gardner Bender Service Center for your repair needs.
Only repairs performed by an Authorized Service
Center displaying the official Gardner Bender
Authorized sign are backed with full factory warranty.
Contact Gardner Bender (414)352-4160 for the name
of the nearest GB Authorized Service Center.
REPAIR AND SERVICE INSTRUCTIONS: For repair service and parts contact your nearest Gardner Bender Service Center. The GB
Service Center will provide complete and prompt service on all Gardner Bender products.
Gardner
Bender
P.O. Box 3241, Milwaukee, WI 53201-3241 • Phone: (414) 352-4160 • FAX (414) 352-2377
ZRPS-0139 10/99
BF44 ROLLER SHAFT
(put lube on shaft) 1 1 / 2 " EMT ROLLER SUPPORT
RPS-0139 1 page 3/29/00 4:08 PM Page 1