Using the tv macro, Glossary – Yamaha Digital Sound YSP-900 User Manual

Page 84

REMOTE CONTROL FEATURES

The TV macro feature makes it possible to perform a
series of operations with the press of a single button. For
example, when you want to play a DVD, you would
normally turn on the component, select DVD as the input
source and press the play button to start playback. The TV
macro feature lets you perform all of these operations
simply by pressing the DVD macro button.

• Be sure to set up a remote control code for your TV before

setting macros.

• The ways to set macros differ if your TV does not have the

tuning capability.

• If you press any control buttons on the remote control other than

the ones used to set macros while setting macros, the setting
procedure is automatically canceled.

• If it takes more than 10 seconds in steps 2 and 3, the setting

procedure is automatically canceled. In this case, repeat from
step 1.

■ Setting macros for the TV with the

tuning capability

Press and hold CODE SET on the remote
control and then press one of the input
selector buttons to select the input source
you want to set macros for.
Proceed to step 2 while holding down CODE SET.

Press MACRO on the remote control while
holding down CODE SET.

Press CH +/– or the numeric buttons to select
the TV channel.
Check that the TV screen changes to the tuner screen.

Press TV INPUT on the remote control
repeatedly so that the screen changes to the
display of the input source selected in step 1.

Press ENTER on the remote control to
confirm the macro setting.

Using the TV macro

Notes

POWER

STANDBY/ON

STEREO

MY BEAM

INPUT2

SLEEP

CH LEVEL

MENU

RETURN

TEST

TV VOL

VOLUME

MUTE

TV INPUT

TV MUTE

ENTER

SURROUND

OFF

CODE SET

SPORTS

+10

5BEAM

ST+3BEAM

3BEAM

MUSIC

MOVIE

VOL MODE

AUTO

SETUP INPUTMODE

MACRO

INPUT1

AUX

YSP

TV/AV

STB

VCR

DVD

TV MUTE

CODE SET