The flow chart of set menu, Using the system memory – Yamaha Digital Sound YSP-900 User Manual
Page 29
USING SET MENU
25
En
SETUP
English
The following diagram illustrates the overall flow of the setup procedure.
The flow chart of SET MENU
Run AUTO SETUP (IntelliBeam).
See “AUTO SETUP (IntelliBeam)” on page 27.
Look for a remedy.
See “Error messages for AUTO SETUP” on page 33 for a complete list of error
messages and possible remedies.
Play back audio signals or adjust the settings for the beam mode and the CINEMA DSP.
See “PLAYBACK” on page 37.
Run MANUAL SETUP.
See “MANUAL SETUP” on page 57.
y
• If you cannot clearly hear a sound beam from a specific channel, adjust settings for
SETTING PARAMETERS (see page 59) or for BEAM ADJUSTMENT (see page 60) in
BEAM MENU.
• If there are acoustically absorbent objects such as curtains in the path of the sound beams,
adjust settings for TREBLE GAIN in BEAM MENU (see page 62).
If an error occurs
If you want to make additional settings
and adjustments
Run LANGUAGE SETUP.
See “CHANGING OSD LANGUAGE” on page 26.