Yamaha Digital Sound YSP-900 - Manual (Page 76)

ADJUSTING SYSTEM PARAMETERS
72
En
This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to
adjust and customize the way this unit operates.
Follow the procedure below to enter the system
parameters.
1
Press STANDBY/ON on the front panel to
turn off the power of this unit.
2
Press and hold INPUT on the front panel and
then press STANDBY/ON on the front panel
to turn on the power of this unit.
MEMORY PROTECT is shown in the front panel
display.
3
Release INPUT on the front panel.
You can protect the settings you saved in the system
memory of this unit from being accidentally erased or
unwantedly changed.
1
Repeat steps 1 to 3 in “Using the system
parameters” on this page.
2
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
3
Confirm that MEMORY PROTECT is shown in
the front panel display and then press
ENTER.
ADJUSTING SYSTEM PARAMETERS
Using the system parameters
STANDBY/ON VOLUME + + INPUT
CH LEVEL MENU
RETURN TEST
ENTER
YSP
TV/AV
STANDBY/ON
INPUT STANDBY/ON
VOL
MEMORY PROTECT
Setting the MEMORY PROTECT
INPUT
YSP
TV/AV
ENTER
VOL
MEMORY PROTECT