Yamaha Digital Sound YSP-900 - Manual (Page 44)

ENJOYING SURROUND SOUND
40
En
You can enjoy multi channel surround sound by changing the beam mode using the beam mode buttons on the remote
control. Select 3 beam, 5 beam and stereo plus 3 beam for multi channel playback.
When ANGLE TO WALL OR CORNER is set in MANUAL SETUP (see page 59), 5 beam and 3 beam cannot be selected.
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
2
Press one of the beam mode buttons
(5BEAM, ST+3BEAM or 3BEAM) to select the
desired beam mode for 5.1-channel play
back.
Outputs sound beams from the front left and right, center,
and surround left and right channels. This mode is ideal
for enjoying surround sound effects to the fullest when
watching DVDs recorded in a multi-channel format or
playing back 2-channel sources in a multi-channel format.
Press 5BEAM on the remote control to select the
5 beam.
• To achieve the best surround sound effect, make sure that there
are no obstacles placed in the path of sound beams in that the
objects may prevent the beams from rebounding directly off the
walls in your listening room.
• The front left and right sound beams are output towards the
walls in your listening room.
• If you press 5BEAM, “SP Pos. Corner!” appears in the front
panel display when INSTALLED POSITION is set to ANGLE
TO WALL OR CORNER.
ENJOYING SURROUND SOUND
Note
STEREO MY BEAM
2 1
SLEEP
CH LEVEL MENU
RETURN TEST
SURROUND
OFF
SPORTS
3
4 5 6
7 8 9
0 +10
5BEAM ST+3BEAM 3BEAM
MUSIC MOVIE
VOL MODE
AUTO
SETUP INPUTMODE
YSP
TV/AV
ENTER
YSP
TV/AV
2 1 3
5BEAM ST+3BEAM 3BEAM
5 beam
Notes
1
5BEAM
01EN_YSP-900_AB_EN.book Page 40 Monday, August 28, 2006 2:01 PM