Input menu, Adjusting system parameters, 3 input menu – Yamaha Digital Sound YSP-900 User Manual

Page 69: A)input assignment 1/2, A)input assignment 2/2, B) input mode, C)input trim, Input assignment (input assignment), Input mode (input mode), Input trim (input trim)

MANUAL SETUP

ANC

OPERA

ION

English

Use to manually adjust various parameters related to the
audio and video input.
SET MENU

→ MANUAL SETUP → INPUT MENU

■ INPUT ASSIGNMENT (Input assignment)

Use to assign the optical and coaxial digital input jacks of
this unit to other components if the initial settings of this
unit do not correspond to your needs. By assigning other
components to the input jacks on this unit, you can display
the name of the connected component in the front panel
display and OSD, and operate the component with the
input selector button of the same name. If you connect a
component to the input jacks of this unit and do not assign
it, the default component name for that input jack is
displayed in the front panel and OSD when selected.
• Select OPTICAL IN (1) to assign components to the

TV OPTICAL IN jack of this unit.
Choices: TV, VCR

• Select OPTICAL IN (2) to assign components to the

AUX OPTICAL IN jack of this unit.
Choices: AUX, DVD

• Select COAXIAL IN to assign components to the

COAXIAL IN jack of this unit.
Choices: DVD, AUX

■ INPUT MODE (Input mode)

Use to designate the input mode for the input sources
connected to the DIGITAL INPUT jacks when you turn on
the power of this unit. For information on the types of
audio signals that can be output by this unit, see “Surround
modes and recommended sources” on page 42.
Choices: AUTO, LAST

• Select AUTO to allow this unit to automatically detect

the type of input signal and select the appropriate input
mode.

• Select LAST to set this unit to automatically select the

last input mode used for that input source. If the type of
input signal is different from the setting, no sounds will
be produced.

■ INPUT TRIM (Input trim)

Use to adjust the input level of the input source.

• Select TV ANALOG to adjust the level of audio and

video signals input at the TV/STB analog audio input
jacks of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB

• Select TV OPTICAL to adjust the level of audio and

video signals input at the TV OPTICAL IN jack of this
unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB

• Select VCR ANALOG to adjust the level of audio and

video signals input at the VCR analog audio input
jacks of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB

• Select AUX OPTICAL to adjust the level of audio and

video signals input at the AUX OPTICAL IN jack of
this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB

• Select DVD COAXIAL to adjust the level of audio and

video signals input at the COAXIAL IN jack of this
unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB

INPUT MENU

A)INPUT

ASSIGNMENT

B)INPUT

MODE

C)INPUT

TRIM

D)INPUT

RENAME

[ ]/[ ]:Up/Down

[ENTER]:Enter

3 INPUT MENU

OPTICAL IN

(1)

;;;;;

(

)

(2)

;;;;; AUX

(

AUX

)

[ ]/[ ]:Up/Down [ ]/[ ]:Sel

[ENTER]:Return

A)INPUT ASSIGNMENT 1/2

COAXIAL IN

(3)

;;;;; DVD

(

DVD

)

[ ]/[ ]:Up/Down [ ]/[ ]:Sel

[ENTER]:Return

A)INPUT ASSIGNMENT 2/2

UTO

LAST

[ ]/[ ]:Select

[ENTER]:Return

)

INPUT MODE

ANALOG;;;-3.0dB

OPTICAL;;-3.0dB

VCR

ANALOG;;;-3.0dB

AUX

COAXIAL;;-3.0dB

DVD

COAXIAL;;-3.0dB

[ ]/[ ]:Up/Down [ ]/[ ]:Sel

[ENTER]:Return

C)INPUT TRIM