beautypg.com

B)beam travel length, C)focal length – Yamaha Digital Sound YSP-900 User Manual

Page 65

background image

61

En

MANUAL SETUP

AD

V

ANCED

OPERA

T

ION

English

BEAM TRAVEL LENGTH (Beam travel length)
A certain amount of delay must be applied to the sound
from each channel so that all sound will arrive at the
listening position at the same time. This menu sets the
distance that sound beams travel after being output and
reflected off the wall until they arrive at the listening
position and adjust the delay applied to the respective
channel.
The lines in the illustration below indicate the distance.

Choices: 0.3 m (1.0 ft) to 24.0 m (80.0 ft)
Front L adjusts the distance the front left channel

sound beams travel.

Front R adjusts the distance the front right channel

sound beams travel.

Center adjusts the distance the center channel sound

beams travel.

Surround L adjusts the distance the surround left

channel sound beams travel.

Surround R adjusts the distance the surround right

channel sound beams travel.

y

We recommend that you use the setting optimized by the AUTO
SETUP (see page 27). Set this menu only when you changed the
HORIZONTAL ANGLE (see page 60).

FOCAL LENGTH (Focal length)
Use to set the distance from the front of this unit to the
focal point of output for each channel and adjust an
expansive feeling of each channel.
The focal points except the center channel should be set
near the reflection points on the walls. The shorter the
distance, more the expansion.

Choices: –1.0 m (–3.5 ft) to +13.0 m (+43.5 ft)
Adjust towards – (minus) to move the focus outward and
adjust towards + (plus) to move the focus towards the
normal position.
Front L adjusts the focal length for the front left sound

beams.

Front R adjusts the focal length for the front right

sound beams.

Center adjusts the focal length for the center sound

beams. Initial setting: –0.5 m (–1.5 ft)

Surround L adjusts the focal length for the surround

left sound beams.

Surround R adjusts the focal length for the surround

right sound beams.

y

We recommend that you use the initial setting (–0.5 m (–1.5 ft))
for the center channel.

5 beam

Front L;;;;;;;6.0m

Front R;;;;;;;6.0m

Center;;;;;;;;2.5m

Surround L;;;;9.1m

Surround R;;;;9.1m

[ ]/[ ]:Up/Down [ ]/[ ]:Sel

[ENTER]:Return

b)BEAM TRAVEL LENGTH

p

p

.

p

p

focal length

focal point

sweet spot

Front left channel

Center channel

5 beam

Front L;;;;;;+1.5m

Front R;;;;;;+1.5m

Center;;;;;;;-0.5m

Surround L;;;+2.3m

Surround R;;;+2.3m

[ ]/[ ]:Up/Down [ ]/[ ]:Sel

[ENTER]:Return

c)FOCAL LENGTH

p

p

.

p

p

01EN_YSP-900_UAB_EN.book Page 61 Thursday, February 22, 2007 2:07 PM