Yamaha RX-V2700 - Manual (Page 67)

65
En
RADIO DATA SYSTEM TUNING (U.K. AND EUROPE MODELS ONLY)
English
BA
S
IC
OPERA
T
ION
5
Press PTY SEEK START on the remote
control to start searching for all the available
Radio Data System preset stations.
The name of the selected program type flashes and
the PTY HOLD indicator lights up in the front panel
display while this unit is searching for stations.
y
To stop searching for stations, press PTY SEEK START on
the remote control again.
• This unit stops searching for stations when a station
broadcasting the selected program type is found.
• If the station found is not the one you desire, press PTY
SEEK START again to resume searching for another
station broadcasting the same program type.
Use this feature to receive the EON (enhanced other
networks) data service of the Radio Data System station
network. Once you select one of the 4 Radio Data System
program types (NEWS, AFFAIRS, INFO, or SPORT), this
unit automatically searches for all the available preset
stations that are scheduled to broadcast the EON data
service of the selected program type for a certain duration
of time. When the scheduled EON data service starts, this
unit automatically switches to the local station
broadcasting the EON data service and then switches back
to the national station once the EON data service ends.
• You can use this feature only when the EON data service is
available.
• The EON indicator lights up in the front panel display only
when the EON data service is being received from a Radio Data
System station.
1
Tune into the desired Radio Data System
broadcasting station.
2
Make sure the EON indicator is lit in the front
panel display.
If the EON indicator is not lit in the front panel
display, select another Radio Data System program so
that the EON indicator lights up.
3
Press EON on the remote control repeatedly
to select one of the 4 Radio Data System
program types (NEWS, AFFAIRS, INFO or
SPORT).
The name of the selected program type appears in the
front panel display.
y
• To cancel the EON feature, press EON on the remote
control repeatedly until the name of the program type
disappears and “EON OFF” appears in the front panel
display.
• When performing this operation with the remote control,
set the operation mode selector to SOURCE and then
press TUNER to select “TUNER” as the input source.
Notes
Using the enhanced other
networks (EON) data service
Notes
POP M
PTY HOLD
Flashes Lights up
PTY SEEK START
REC
NET RADIO USB
PC/MCX
FREQ/TEXT EON MODE PTY SEEK START
EON
EON
EON
USB
NEWS
Lights up