Auto setup, Using auto setup, Omni-directional microphone optimizer microphone – Yamaha RX-V2700 User Manual
Page 37
AUTO SETUP
35
En
English
PRE
P
ARA
T
ION
This unit employs the YPAO (YAMAHA Parametric Room Acoustic Optimizer) technology which lets you avoid
troublesome listening-based speaker setup and achieves highly accurate sound adjustments automatically. The supplied
optimizer microphone collects and this unit analyzes the sound your speakers produce in your actual listening
environment.
Once you have connected the supplied optimizer
microphone to the OPTIMIZER MIC jack on the front
panel and have placed it in a suitable location in your
listening room, run “Auto Setup” in the GUI screen.
• Connect a video monitor to run “Auto Setup” (see page 23).
• Be advised that it is normal for loud test tones to be output
during the “Auto Setup” procedure.
• To achieve the best results, make sure the room is as quiet as
possible while the “Auto Setup” procedure is in progress. If
there is too much ambient noise, the results may not be
satisfactory.
y
• If an error occurs during the “Auto Setup” procedure and an
error or warning message appears in the GUI screen or in the
front panel display, see the “Auto Setup” section in
“TROUBLESHOOTING” on pages 138 and 139 for a complete
list of error and warning messages and proper remedies.
• The initial setting for each parameter is indicated in bold.
• If the volume level and the crossover frequency of your
subwoofer can be adjusted, set the volume level to about half
way (or slightly less) and set the crossover frequency to the
maximum.
1
Connect the supplied optimizer microphone
to the OPTIMIZER MIC jack on the front
panel.
2
Place the optimizer microphone at your
normal listening position on a flat level
surface with the omni-directional
microphone heading upward.
y
It is recommended that you use a tripod (etc.) to affix the
optimizer microphone at the same height as your ears would be
when you are seated in your listening position. You can use a 6
mm diameter screw to fix the optimizer microphone to a tripod
(etc.).
AUTO SETUP
Using Auto Setup
Notes
VOLUME
CH
TV VOL
EFFECT
STRAIGHT
MEMORY
A/B/C/D/E
SRCH MODE
PURE DIRECT
PRESET/CH
SET MENU
BAND
LEVEL
TV
SOURCE
AMP
–
+
+
–
–
+
ENTER
DISPLAY
AUDIO
MENU
TITLE
TV MUTE
TV INPUT
MUTE
RETURN
5-12
4,13
4
ENHANCER
NIGHT
ZONE ON/OFF
ZONE CONTROLS
MODE
TUNING
PRESET/TUNING
EDIT
MULTI ZONE
FM/AM
PRESET/
TUNING
MAN'L/AUTO FM
MEMORY
MIC
OPTIMIZER
EFFECT
STRAIGHT
CONTROL
SELECT
AUDIO
TONE
REC OUT/
ZONE2
A/B/C/D/E
PROGRAM
YPAO
ZONE 3
R
L
OPTICAL
USB
ZONE 2
AUDIO
VIDEO AUX
SILENT CINEMA
S VIDEO
VIDEO
PHONES
Omni-directional
microphone
Optimizer microphone