139 fo – Yamaha RX-V2700 User Manual
Page 141
139
En
TROUBLESHOOTING
English
AD
DITIONAL
INFO
RM
A
T
ION
After Auto Setup
• If the “ERROR” or “WARNING” screens appears, check the cause of the problem, then run “Auto Setup” again.
• If warning “W1” appears, corrections are made, but they may not be optimal.
• If warning “W2” or “W3” appears, no corrections are made.
• If error “E10” occurs repeatedly, please contact a qualified YAMAHA service center.
Warning message
Cause
Remedy
See
page
W1:Out of Phase
Speaker polarity is not correct. This
message may appear depending on the
speakers even when the speakers are
connected correctly.
Check the speaker connections for proper
polarity (+ or –).
W2:Over Distance
The distance between the speaker and the
listening position is over 24 m.
Bring the speaker closer to the listening
position.
—
W3:Level Error
The difference of volume level among
speakers is excessive.
Readjust the speaker installation so that all
speakers are set in locations with similar
conditions.
—
Check the speaker connections.
Use speakers of similar quality.
—
Adjust the output volume of the subwoofer.
W4:SP Mismatch
The result of the wiring check of “Auto
Setup” is different from “Speaker Set” in
“Manual Setup”.
Use “Speaker Set” in “Manual Setup” to
adjust the speaker settings manually.
Notes