beautypg.com

Manual setup (net/usb) – Yamaha RX-V2700 User Manual

Page 102

background image

100

En

GRAPHIC USER INTERFACE (GUI) SCREEN

Speaker Level (Speaker level)

Use this feature to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in “SPEAKER SET” (see page 96).

Control range: –10.0 dB to +10.0 dB
Initial setting:
Front L/Front R/Presence L/Presence R/
Subwoofer: 0.0 dB
Center/Surround L/Surround R/Surround Back L/
Surround Back R: –1.0 dB
Control step: 0.5 dB
• Select “Front L” to adjust the balance of the front left

speaker.

• Select “Front R” to adjust the balance of the front right

speaker.

• Select “Center” to adjust the balance of the center

speaker.

• Select “Surround L” to adjust the balance of the

surround left speaker.

• Select “Surround R” to adjust the balance of the

surround right speaker.

• Select “Surround Back L” to adjust the balance of the

surround back left speaker.

• Select “Surround Back R” to adjust the balance of the

surround back right speaker.

• Select “Presence L” to adjust the balance of the

presence left speaker.

• Select “Presence R” to adjust the balance of the

presence right speaker.

• Select “Subwoofer” to adjust the balance of the

subwoofer.

• You cannot adjust the level of channels set to “None” in

Speaker Set.

• If you are only using one surround back speaker, connect it to

the SURROUND BACK (SINGLE) jack, and adjust the balance
in “Surround Back L”.

Use this menu to adjust the network and USB system
parameters.

Network (Network settings)

Use this feature to view the network parameters (IP
address, etc.) or to change them manually.

The above display is an example.

DHCP (DHCP setting)

When this parameter is set to “ON”, network parameters
for “IP Address”, “Subnet Mask”, “Default Gateway”,
“DNS Server (P)” and “DNS Server (S)” obtained from a
DHCP enabled router are displayed. If DHCP server
function is not available, set this parameter to “Off” to
configure the network parameters manually.
Choices:

On

, Off

IP Address (IP address)

Use this parameter to specify an IP address assigned to
this unit. This value must not duplicate the one used for
other devices in the target network.

Subnet Mask (Subnet mask)

Use this parameter to specify the subnet mask value
assigned to this unit.

y

For most of the cases, the subnet mask value can be set as
“255.255.255.0”.

Default Gateway (Default gateway)

Use this parameter to specify the IP address of the default
gateway.

Notes

Speaker Distance

Presence R

Subwoofer

Speaker Level

Speaker Set

Front R

Center

Front L

Manual Setup (NET/USB)

Note

Play Style

Information

Network

Basic

NET/USB

Option

Video

IP Address

Subnet Mask

DHCP

Play Style

Information

Network