Yamaha RX-V2700 - Manual (Page 104)

102
En
GRAPHIC USER INTERFACE (GUI) SCREEN
■ Information (Network information)
Use this feature to display the network system
information.
The above display is an example.
MAC Address
(MAC (Media Access Control) address)
This information displays the MAC address that is
assigned to this unit.
Status (Network status)
This information displays the current link status of the
network.
Display status: 10BASE-T, 100BASE-TX,
Full Duplex, Half Duplex, No Link
“No Link” appears when network connection is not made.
System (Unique system ID)
This information displays the unique ID numbers that is
assigned to this unit.
This menu adjusts the optional system settings.
1
Set the operation mode selector to AMP and
then press SET MENU on the remote control.
2
Press k / n on the remote control to select
“Manual Setup” and then press h .
3
Press k / n / l / h on the remote control to
select “Option” and then press h .
4
Select the desired parameters and then press
h to access and adjust.
Note
Note
MAC Address
Status
System
100 BASE-TX
Full Duplex
ABCDE123
00:00:00:00:00:00
Information
Network
Play Style
Manual Setup (Option)
MENU
SRCH MODE
SET MENU
TV
SOURCE
AMP
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER
iPod
Front Panel Disp.
Zone2 Set
Zone3 Set
Zone OSD Option
Basic
Video
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER