Yamaha MOTIF XS7 EN - Manual (Page 212)

Pattern Playback
MOTIF XS Owner’s Manual 212
V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance
mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
Pattern Creating—[F4] Patch
This display lets you assign a Phrase to each track to
create a Pattern. 16 Sections named A – P can be created
for each Pattern. You can assign a User Phrase created
with the current Pattern selected. If you wish to use User
phrases recorded to tracks of other Patterns, use the
Phrase Data Copy function, selected with the [SF5] button.
Regarding parameters with no number, refer to the Play
display (page 210).
1 No. (Phrase Number)
Determines the Phrase number to be assigned to a track.
You can select one of the 256 User Phrases stored to the
selected Pattern. Please note that the User Phrases have
no data by default. When set to “---,” the track becomes
empty.
Settings: --- (off), 001 – 256
n The MOTIF XS features no Preset Phrase data.
2 Phrase Name
Indicates the name of the selected Phrase. You can
change the Phrase name by moving the cursor here and
pressing the [SF6] CHAR button.
n For detailed instructions on naming, refer to “Basic Operation”
on page 82.
3 [SF4] Clear
Pressing this button clears the Phrase assignment to the
currently selected track and leaves the track empty. Move
the cursor to the Phrase (track) to be cleared then press
the [SF4] button.
4 [SF5] Copy
Pressing this button copies a Phrase in another Pattern to
the selected one then assign it to the specified track. This
is useful if you are creating a Pattern and wish to use the
Phrase data from another Pattern.
1 Source phrase
Determines the Pattern number and the Phrase number
(001 – 256) to be copied.
2 Copy Sample Voice
When this box is checkmarked, Sample Voices assigned to
the source phrase are copied to the destination phrase as
Sample Voices, and are assigned to the corresponding
tracks in the selected Pattern.
3 Current Pattern Phrase and Track
Determines the number (001 – 256) of the destination
Phrase and track (1 – 16) to which the Phrase is assigned.
Any previous data in the copy destination will be overwritten.
Important data should always be saved to a USB storage device
connected to the USB TO DEVICE terminal or to a computer
connected to the same network as the MOTIF XS (page 278).
Undo/Redo cannot be used to undo/redo a Sample Voice copy
operation.
5 Length (Indication only)
Indicates the length of each Phrase assigned to each
track.
1
Select a Pattern from the Play display (page 210).
2
Press the [F4] button to call up the Patch
display.
3
Select a Section (A – P).
Move the cursor to the Section, then select the desired
Section by using the data dial, [INC/YES] and [DEC/
NO] button.
4
Set the meter (time signature), tempo, and
length of the Pattern.
Move the cursor to the desired parameter (such as
length, time signature or tempo), then set the value by
using the data dial, [INC/YES] and [DEC/NO] button.
3 4
1 2 5
Creating a Pattern
1
2
3
CAUTION
CAUTION