Yamaha MOTIF XS7 EN - Manual (Page 131)

Editing a Drum Voice
MOTIF XS Owner’s Manual 131
V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
# Coarse (Pitch Coarse Tuning)*
Determines the pitch of each Drum Key in semitones.
Settings: -48 semi – +0 semi – +48 semi
$ Fine (Pitch Fine Tuning)*
Determines the pitch of each Drum Key in cent.
Settings: -64 cent – +0 cent – +63 cent
% Pitch Velocity Sens (Pitch Velocity Sensitivity)
Determines how the pitch of the Drum Key responds to
velocity. Positive settings will cause the pitch to rise the
harder you play the keyboard. A setting of 0 will cause the
pitch not to change. Negative settings will cause the pitch
to rise the more softly you play the keyboard.
Settings: -64 – +0 – +63
^ [SF5] PageHold
Normally in the Drum Voice Edit mode, pressing a note on
the keyboard alternates the key (instrument) being edited
automatically. When the [SF5] PageHold button is turned
on, the key (instrument) being edited is maintained even if
you press any other note on the keyboard. This allows you
to edit a certain key while adjusting the level balance
between the key being edited and the other keys.
Adjust the brightness using the
Filter—[F3] Filter
Each Drum Key has its own independent low pass filter
and high pass filter. You can adjust the tonal characteristics
of each drum sound by setting the Cutoff Frequency and
Resonance.
1 Cutoff*
Raises or lowers the cutoff frequency of the low pass filter
to adjust the tone brilliance. The sound can be brightened
by raising the cutoff frequency, and darkened or muffled by
lowering it.
Settings: 0 – 255
2 Cutoff Velocity Sens
(Cutoff Velocity Sensitivity)*
Determines how the Cutoff Frequency responds to velocity,
or the strength with which you play notes. Positive settings
will cause the Cutoff Frequency to rise the harder you play
the keyboard. A setting of 0 will cause the Cutoff
Frequency not to change depending on velocity. Negative
settings will cause the Cutoff Frequency to rise the more
softly you play the keyboard.
Settings: -200% – +0% – +200%
3 Resonance*
Determines the emphasis given to the Cutoff Frequency to
add further character to the sound. Higher values result in
a more pronounced effect.
Settings: 0 – 127
4 HPF Cutoff (High Pass Filter Cutoff Frequency)*
Determines the Cutoff Frequency of the High Pass Filter.
Settings: 0 – 255
Amplitude settings—[F4] Amplitude
From the following displays, you can set various
parameters for the selected Drum Key, such as Volume,
Pan, and Amplitude EG.
1 Level*
Determines the output level of the Drum Key.
Settings: 0 – 127
2 Velocity Sens (Velocity Sensitivity)*
Determines how the output level of the Drum Key responds
to velocity. Positive settings will cause the output level to
rise the harder you play the keyboard. A setting of 0 will
cause the output level not to change. Negative settings will
cause the output level to rise the more softly you play the
keyboard.
Settings: -64 – +0 – +63
3 Pan*
Adjusts the stereo pan position of the sound.
Settings: L63 (far left) – C (center) – R63 (far right)
4
1
2
3
Key
2
1 3
4
5
6 7
9
8