Panasonic CF-52 Series - Manual (Page 44)

44
External Display
NOTE
z It may not be possible to use the extended desktop with some software applications.
z When you click the maximize button, the window is displayed on one of the displays. You cannot move the maximized
window to the other display.
z To switch left (primary device) and right (secondary device), once return the display to “notebook only”. Follow the
steps below. (Only for model with Mobile Intel
® GM45 Express Chipsets)
A Right-click the desktop and click [Graphics Options].
B Click [Output To] - [Notebook].
C Right-click the desktop and click [Graphics Options].
D Click [Output To] - [Extended Desktop], and click [Monitor + Notebook] (the external display will be set to primary
device) or [Notebook + Monitor] (the internal LCD will be set to primary device).
z To switch to the Extended Desktop, be sure to use the [Intel
®
Graphics Media Accelerator Driver for Mobile] screen. If
you use other methods (e.g. display setting, etc.), the screen may not be displayed correctly. (Only for model with
Mobile Intel
® GM45 Express Chipsets)
z The pop-up icon displayed by Fn key combination appears only on the primary device.
z
Set the internal LCD to the primary device when using the touchscreen. The cursor will move on the primary device
when you touch the internal LCD.
„ To change the display settings
®
PM45 Express Chipsets>
1
Click (Start) - [Control Panel] - [Adjust screen resolution].
2
Set the display color and resolution etc.
3
Click [OK].
®
GM45 Express Chipsets>
1
Right-click the desktop, and click [Graphics Properties].
2
Select the display destination in [Operating Mode] and click [Apply].
3
Click [OK].
4
Click [Display Settings] and set the display color and resolution etc.
5
Click [OK].