Panasonic WJ-ND200 User Manual

Page 65

• When any setting has been changed during the down-

load, the download will be canceled automatically. In
this case, the downloaded file is not a complete file
and it is impossible to play it.

• The "ActiveX control" is not installed in the PC. Install

the "ActiveX control" by referring to the following
page.

• When trying to display MPEG-4 images via Internet,

images may not be displayed.
MPEG-4 image display via Internet is affected by the
configurations of the network devices such as a
router. Refer to the network administrator for further
information.

• Are the connected network cameras configured cor-

rectly?
Check the settings of the setup menu ("Camera" -
"NW Camera Setup").

• Are the settings of the setup menu ("Schedule" -

"Program" - "LIVE VIDEO") configured correctly?
Check the settings.

• Are the network settings of the cameras and the unit

configured correctly?
Check the settings of IP address, subnet mask and
default gateway for them.

• When MPEG-4 is selected for the image compression

method of the camera, live images may not be dis-
played in the image display area and black screen will
be displayed for a few minutes in the following cases.

• When frequently checked if the appropriate values

are set for the recording settings (by clicking the
[Measurement] button on the "Program Setup"
window ("Schedule" - "Program")).

• When the settings of the unit are saved repeated-

ly. Wait around 10 minutes without any operations.
The unit will function normally.

Cause/solution

The message "Please Wait."
remains on the screen.

Cannot play the downloaded
image file.

No live image is displayed.

–

Refer to the

setup instruc-

tions (PDF).

Refer to the

setup instruc-

tions (PDF).

–

Refer to the

setup instruc-

tions (PDF).

Reference

pages

Symptom