Panasonic WJ-ND200 - Manual (Page 61)

61
When the Error Log is Displayed
Parameter
f
Description
FAN number
Detail
1-2: FAN number (FAN1-FAN2)
d Disk number 1-2: Disk number (HDD1-HDD2) 5: Others
cc Camera number 01-16: Camera number
Parameter in the logs above
CAMERA cc SD ERROR
CAM cc SD START ERR
CAM cc SD END ERR
An SD card memory error occurred.
The SD memory card may be not detected,
or there is no available space on the SD
memory card on the camera.
CAM cc GET LIST ERR
CAM cc GET IMG ERR
CAM cc DEL IMG ERR
HDDd FORMAT-ERR
M-FAILd
M-FORMAT ERR
An SD card memory error occurred.
Communication with the network camera is
unstable, or no network camera is connect-
ed.
The HDD may be malfunctioning, or may
be not inserted correctly and firmly.
Failed to recover data using the mirroring
function.
The HDD may be malfunctioning.
Check the SD memory card and the set-
tings on the camera.
Check the SD memory card and the set-
tings on the camera.
Check the communication status between
this unit and the network camera.
Remove and mount the hard disk drive
again by following the instructions of how
to mount/remove the hard disk drive, and
then format it.
If this error occurs frequently, contact the
dealer to replace the HDD*.
Contact the dealer to replace the HDD*.
Check the communication status between
this unit and the network camera.
REMOVE d The HDD has been unmounted from the
system automatically. Contact the dealer. After replacing the
faulty disk*, the error status will be can-
celed.
HDD-**- or HDD-FULL The HDD is almost full or completely full. Format or replace the HDD*.
CAM cc ERR
LINK_ERR
Communication with the network camera is
unstable, or no network camera is connect-
ed.
The unit is disconnected from the network. Check the network connection.
W-ERR d Failed to write/read data on the HDD. The
HDD may be malfunctioning. If this error occurs frequently, contact the
dealer to replace the HDD*.
R-ERR d
SKIP d
The HDD may be malfunctioning and may
work incorrectly. Contact the dealer to replace the HDD*.
H.METER d
SMART d
The set time for the hour meter has
passed. It may be reaching the end of the
HDD’s lifetime. Contact the dealer to replace the HDD*.
Do the following when the error log is displayed. Contact the dealer when an unlisted error occurred.
Error Log Description Solution
*: The HDD should be replaced by/purchased from the qualified service personnel or system installers.