Panasonic WJ-ND200 User Manual

Page 12

Important:

• Only the mounted hard disk drives can be formatted when operating in the mirroring mode. It is impossible to for-

mat an unmounted hard disk drive or a hard disk drive that is in the process of mounting.

• When the USE button is not blinking green (neither off nor blinking orange), the corresponding hard disk drive is

already formatted. When the hard disk drive is formatted, all data on the disk will be erased.

• The hard disk drive for which the write protection is on cannot be formatted.
• When the following operation is being performed, it is impossible to switch the operational mode from the single

mode to the mirroring mode.

• SD memory data obtainment
• Auto camera registration ("Quick" – "Camera Auto Registration")
• Camera search ("Camera" – "Camera Search")

• When formatting the hard disk drives in the mirroring mode, connection to the FTP server and sending mails are

unavailable.

• When using in the mirroring mode, the actual available size of the hard disk drive will be smaller than when using

in the single mode.

Switch the operational mode from the mirroring mode to the
single mode

To change the operational mode from the mirroring mode to the single mode, do the following.

Open the front cover and confirm that both
the USE buttons are off (indicating that no
hard disk drive is mounted).

Note:

Refer to page 13 for how to remove the hard disk
drive.

Hold down the both FORMAT buttons for 5
seconds or more.

Switching the operational mode from the mirror-
ing mode to the single mode will start. (The
buzzer will start sounding and the FORMAT but-
tons will start blinking green.)
When operation of the unit in the single mode
starts, the FORMAT buttons and MIRROR indi-
cator will go off.

HDD bay slot

USE button (with the indicator)

HDD1

HDD2

FORMAT

USE

FORMAT

MIRROR indicator

USE button
(with the indicator)

FORMAT button (with the indicator)

LINK
/ACT

HDD2

HDD1

ALARM

SUSPEND

ALARM

BUZZER

STOP

ERROR

MIRROR

TIMER

REC

OPERATE

HDD1

HDD2

FORMAT

USE

FORMAT