beautypg.com

Sony ER-A420 User Manual

Page 81

background image

*1 First figure:

The first figure to be entered depends upon whether the difference between a minimum
breakpoint to be entered and the preceding minimum breakpoint is not less than $1.00 or
more than 99¢. When the difference is not less than $1.00, enter “1,” and when it is not more
than 99¢, enter “0” or nothing.

Second figure: The second figure depends upon whether your tax table is to be programmed as tax table 1,

2, 3 or 4. When your tax table is to be programmed as tax table 1, enter “1”; when it is to be
programmed as tax table 2, enter “2”; when it is to be programmed as tax table 3, enter “3”;
and when it is to be programmed as tax table 4, enter “4”.

*2 If the rate is fractional (e.g. 4-3/8%), then the fractional portion (3/8) would be converted to its decimal

equivalent (i.e. .375) and the resulting rate of 4.375 would be entered. Note that the nominal rate (R) is
generally indicated on the tax table.

If you make an incorrect entry before entering the M in programming a tax table, cancel it with the

c

key; and if you make an error after entering the M, cancel it with the

ı

key. Then program

again from the beginning correctly.

• Limitations to the entry of minimum breakpoints

Your register can support a tax table consisting of no more than 72 breakpoints. (The number of breakpoints is
36 maximum when the breakpoint difference is $1.00 or more.) If the number of breakpoints exceeds the
register’s table capacity, then the manual entry approach should be used.

Programming the sample tax table shown on the previous page as tax table 1

You do not need to enter the trailing zeros of the tax rate (after the decimal point) but you do need
to enter the decimal point for fractions.

Note

1

@

6

@

100

@

1

@

11

@

23

@

39

@

57

@

73

@

89

@

111

@
a

Print

Key operation

Example

Note

@

@

max. six digits
(0.0001 - 99.9999%)

max. four
digits

One- or two-
digit number

Rate

M

*1

*2

@

max. three
digits

T

@

max. five
digits

Q

@

Ç

Minimum breakpoint
max. five digits

Repeat until the MAX point is entered.

@

Procedure

Tax rate

M

T

Q

The first
cyclic
portion

M1
(MAX point)

79

ER-A410/A420(SEC)-3 03.12.22 0:18 PM Page 79

This manual is related to the following products: