Sony ER-A420 User Manual

Page 18

Cashier codes are available in two variants: Variant 1, in which they are displayed (“0000” to “9999”), and
Variant 2, in which they are not displayed (always “

”).

When the cashier code is assigned by the following procedure, the register prints the four-digit cashier code
(variant 2: “

”) and the cashier name both on the receipt and journal for every transaction.

All of these settings depend on how the register has been programmed. For the selection of these
settings, consult your local dealer.

You can disable receipt printing in the REG mode to save paper using the receipt function. To disable receipt
printing, press the

key in the OP X/Z position. This key toggles the receipt printing status ON and OFF. To

check the receipt printing status, turn the mode switch to the OP X/Z position or press the

key in the REG

mode. When the function is in the OFF status, the receipt off indicator “_” illuminates.

Your register will print reports regardless of the receipt status. This means that the receipt roll must
be installed even when the receipt state is “OFF” when taking reports.

Note

Receipt ON/OFF function

Note

‹

Cashier code

To display the current cashier code

‹

Cashier code

‹

■ Sign-on

Variant 1 :
(Code is displayed.)

Variant 2 :
(Code is not displayed.)

■ Sign-off

Variant 1 / Variant 2 :

Procedure

✱ ✱

Cashier code entry key

ER-A410/A420(SEC)-1 03.12.22 0:13 PM Page 16

This manual is related to the following products:

ER-A410