Icom IC-U82 - Manual (Page 74)

62
12
OTHER FUNCTIONS
D D Memory bank setting
Sets the desired memory bank (A to J and OFF) to assign the
regular memory channels.
This item appears when
SET MODE is accessed from memory
mode only.
D D Memory bank link function
Sets the memory bank link function ON and OFF (default).
The link function provides continuous banks scan, scanning
all contents in the selected banks during bank scan.
This item appears when
SET MODE
is accessed from memory
mode only.
• Bank link setting
q Rotate [VOL] to select the memory bank link function ON.
w Push [ Y Y ] or [ Z Z ] to select the desired bank to be linked.
• bLA: Bank A, bLb: Bank B, bLC: Bank C, bLd: Bank D,
bLE: Bank E, bLF: Bank F, bLG: Bank G, bLH: Bank H,
bLI: Bank I, bLJ: Bank J
e Rotate [VOL] to “ON” to link the bank.
r Repeat steps w and e to link other banks.
D D Wide/Narrow setting
Selects both the transmission and reception passband width
from wide (default) and narrow.
When narrow is selected, the transmission and reception
passband width become half of the wide setting (approx.).
This setting can be set for each memory, call and VFO inde-
pendently.
D D Weather alert function
Turns weather alert function ON and OFF (default).
IC-V82 [USA]/[CSA] versions only