Icom IC-U82 User Manual
Page 56
44
11
DIGITAL MODE OPERATION
D
D
Station call sign programming
Station call sign must be programmed for the specified sta-
tion call as well as repeater operation in both digital voice and
low-speed data communications.
q Push
[A•
FUNC
]
and
[0•
OPT
]
to enter
OPTION SET MODE
, then
push
[
Y
Y
]
or
[
Z
Z
]
several times to select the call sign select
mode.
• “yUC” appears for station call sign.
w Push and hold
[0•
OPT
]
for 1 sec. then rotate
[VOL]
to se-
lect the desired call sign channel.
e Push
[
Y
Y
]
to select call sign programming mode.
• The 1st digit blinks and channel indication stops blinking.
r Rotate
[VOL]
to select the desired character or code.
• Push
[
Z
Z
]
or
[
Y
Y
]
to move the cursor to left or right, respectively.
t Push
[
Y
Y
]
to select 2nd digit, then rotate
[VOL]
to select
the desired character or code.
• 2nd digit blinks (1st digit stops blinking).
• Repeat this step for programming station call sign.
y Push
[0•
OPT
]
to save the call sign.
u Rotate
[VOL]
to select an another channel from “C1” to
“C6.”
i Repeat steps w to u to program another station call sign
channels.
✔
For your information:
Station and/or repeater call sign can be programmed from
Received call record when a call is received.
See page 46 for details.