Icom IC-U82 - Manual (Page 44)

32
8
SCAN OPERATION
■
Skip channels
In order to speed up the scan rate, you can select memory
channels you don’t wish to scan as skip channels.
q Push [C• MR ] to select memory mode, if necessary.
• “X” appears.
w Select a memory channel to set as a skip channel.
e Push
[A•
FUNC
] and [6•
SKIP
] to toggle the skip setting ON
and OFF.
• “SKIP” appears when the channel is set as a skip channel.
■
Priority watch
Priority watch checks for signals on “priority channels” while
operating on a VFO frequency.
D Memory or call channel watch
While operating on a VFO frequency, memory or call channel
watch monitors for signals in the selected memory or call
channel every 5 sec.
q Select the desired memory channel or the call channel.
w Push
[D• CLR ] to select VFO mode.
e Push [A• FUNC ] , then push [7• PRIO ] to start watching.
• VFO is displayed, then the decimal point “ . ”, on the frequency
readout blinks.
• The priority channel is monitored every 5 sec.
• When the signal is detected on the priority channel, the watching
is suspended according to the setting of the scan resume condi-
tion.
r Push [D• CLR ] to stop watching.
5 sec. 50 msec.
VFO frequency Memory channel
Push
“SKIP” appears
SKIP FUNC
A 6