Icom IC-U82 - Manual (Page 11)

IV
QUICK REFERENCE GUIDE
Direct frequency input from the key-
pad is also available.
➥ To enter the desired frequency,
enter 6 digits starting from the
100 MHz digit.
• Entering three* to five digits then
pushing [ ✱ • ENT ] will also set the
frequency. (*Some versions only re-
quires two digits.)
• When a digit is mistakenly input,
push [D. CLR ] to abort input.
5. Transmit and receive
➥ Push and hold
[PTT] to transmit, then speak into the mi-
crophone; release to receive.
■
Repeater operation
1. Setting duplex
➥ Push [A• FUNC ] , then [4• DUP ] sev-
eral times to select minus duplex
or plus duplex.
• The USA/CSA versions have an auto
repeater function, therefore, setting
duplex is not required.
2. Repeater tone
➥ Push
[A• FUNC ] , then [1• TONE ]
several times until “ ” appears, if
required.
TONE
1
FUNC
A
DUP
4
FUNC
A
• Example 1— when entering 145.525 MHz
Push
• Example 2— when entering 144.800 MHz
P.BEEP
2
DUP
4
DUP TONE
4 1
SCAN
5
SCAN
5
SCAN
5
Push
DUP TONE
4 1
OPT
0
SET
8
ENT
CLR
D
Keypad
ENT
Quick reference guide