Channel name programming – Icom IC-U82 User Manual
Page 35
23
6
MEMORY/CALL OPERATION
6
■
Channel name programming
q Select a “Channel Name Indication” type in
INITIAL SET
MODE
(p. 65).
w Push
[C•
MR
]
to select memory
mode, if necessary.
e Push
[A•
FUNC
]
, then push
[8•
SET
]
to enter into the channel name
programming mode.
• The character to be edited blinks.
r Rotate
[VOL]
to select a charac-
ter.
t Push
[
Y
Y
]
to move the cursor to right,
[
Z
Z
]
to move the cur-
sor to left.
• Up to 5 characters can be used for channel name.
• Usable characters are A–Z, 0–9, “space,” +, –, =,
✱, /, [, ] and :.
y Push
[
✱
•
ENT
]
(or
[D•
CLR
]
) to set the name and exit the
channel name programming mode.
■
Memory transfers
This function transfers a memory channel’s contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency etc.
D
Memory/call
➾
VFO
q Select the memory (call) channel
to be transferred:
➥ Push
[C•
MR
]
(or
[B•
CALL
]
) to
select memory (call) mode.
➥ Push
[
Y
Y
]
or
[
Z
Z
]
to select the
memory channel.
• When
[VOL]
is assigned as tuning
dial, rotate
[VOL]
to select the
memory channel. (pgs. 14, 65)
w Push
[A•
FUNC
]
, then push and
hold
[C•
MR
]
for 1 sec. to transfer
the selected memory contents to
the VFO.
• VFO mode is selected automatically.
FUNC
A
MR
C
CALL
B
FUNC
A
MR
C
SET
8
[VOL]
ENT