Icom IC-U82 - Manual (Page 72)

60
12
OTHER FUNCTIONS
D D DTCS code
Selects DTCS (both encoder/decoder code) for DTCS
squelch operation. Total of 104 codes are available.
• 023–754: 023 (default)
D D DTCS polarity
Selects DTCS polarities for transmission and reception from
“nn (default),” “nR,” “Rn” and “RR.” (n: normal/R: reverse)
D D Tuning step
Selects tuning step from 5, 10, 12.5, 15, 20, 25, 30 and
50 kHz for
[ Y Y ] / [ Z Z ] or [VOL] ( When [VOL] is assigned as tuning
dial ) operation. (default value may differ depending on trans-
ceiver types and versions)
D D Offset frequency
Sets the duplex offset frequency within 0 to 20 MHz range.
During duplex (repeater) operation, transmit frequency (or re-
ceive when reverse function is set to ON) shifts the set fre-
quency. (default value may differ depending on transceiver
types and versions)
D D Reverse function
Turns the reverse function ON and OFF (default).
Reverse function OFF Reverse function ON