Intel SR1500AL - Manual (Page 85)

Intel
®
Server System SR1500AL User’s Guide 63
8. Install the PCI riser assembly. For instructions, see “Installing the PCI Riser
Assembly” .
9. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct” .
10. Install the server system cover. For instructions, see “Installing the System Cover” .
11. Plug all peripheral devices and the AC power cable(s) into the server.
Removing the Server Board
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” .
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the server system cover. For instructions, see “Removing the System
Cover” .
4. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” .
5. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” .
6. Remove the six screws from the server board (see letter “A”) and lift the server
board from the server system (see letter “B”).
Figure 53. Removing the Server Board
AF000380
A
B