ICP DAS USA I-7540D User Manual
Page 54

Step 3: Send command “
10
” to the i-7540D. And it will response “7188E3
message.
Step 4: Select “
Port 2
” and “
CR
”. Then send “
$02M
” to read 7000 module’s ID
which is connected to i-7540D’s COM2. If you enable 7000 module’s
checksum function, select “
CS_CR
”. The “
CS_CR
” option will add two
checksum bytes, then adds “
CR”
.
1
2
2
3
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008)
54