ICP DAS USA I-7540D User Manual
The i-7540d can-ethernet gateway, User’s manual
The i-7540D CAN-Ethernet Gateway
User’s Manual
Warranty
All products manufactured by ICP DAS are under warranty
regarding defective materials for a period of one year from the date of
delivery to the original purchaser.
Warning
ICP DAS assumes no liability for damages resulting from the use
of this product. ICP DAS reserves the right to change this manual at
any time without notice. The information furnished by ICP DAS is
believed to be accurate and reliable. However, no responsibility is
assumed by ICP DAS for its use, or for any infringements of patents or
other rights of third parties resulting from its use.
Copyright
Copyright 2005 by ICP DAS. All rights are reserved.
Trademark
The names used for identification only may be registered
trademarks of their respective companies.
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008)
1
Document Outline
- 1. Introduction
- 1.1 Features
- 1.2 Specifications
- 1.3 VxComm Technology
- 2. Hardware
- 3. Software Utilities
- 3.1 i-7540D Utility
- 3.1.1 Install & uninstall the i-7540D Utility
- 3.1.2 How to configure the module parameters
- 3.1.3 How to set the Bus Timing Registers
- 3.1.4 How to set the Acceptance Code and Mask
- 3.1.5 Enable Error Response
- 3.1.6 Enable Time-stamp Response
- 3.1.7 How to change web ID/PASSWORD configuration
- 3.1.8 How to test the module transmission performance
- 3.1.9 How to use CAN Bus Pair Connection
- 3.2 MiniOS7 Utility
- 3.3 VxComm Utility
- 3.1 i-7540D Utility
- 4. Support Command List
- 4.1 tIIILDD…
- 4.2 TIIIL
- 4.3 eIIIIIIIILDD…
- 4.4 EIIIIIIIIL
- 4.5 99S
- 4.6 99C
- 4.7 99RA
- 4.8 99#P01
- 4.9 99#P02
- 4.10 99#P1
- 4.11 99#P1B
- 4.12 99$P0105BBDSP
- 4.13 99$P0205BBDSP
- 4.14 99$P114PBCC…MM…ET
- 4.15 99$P1B04TTRR
- 4.16 99#PWID
- 4.17 99#PWPW
- 4.18 99$PWIDLLxxxxx…
- 4.19 99$PWPWLLxxxxx…
- 4.20 99#PPC
- 4.21 99#PPIP
- 4.22 99$PPCLLABC
- 4.23 99$PPIPxxx…
- 4.24 General Error codes for commands from port 10003
- 4.1 tIIILDD…
- 5. VxComm Applications
- 6. Application with PISO-CAN 200/400 T
- 7. Diagnostics and Troubleshooting