Integra RDV-1.1 - Manual (Page 85)

85
Configuring the RDV-1.1 —Continued
Title/Group Stop
With this setting you can determine whether or not play-
back stops when the title or group that’s currently play-
ing ends.
Off (default)
Playback continues when the title or group ends.
On
Playback stops when the title or group ends.
PBC
This setting is used to enable or disable PBC (Playback
Control) for VCDs.
Off
PBC disabled.
On (default)
PBC enabled.
Notes:
• PBC functionality depends on the disc. See the disc’s
sleeve notes for details.
• Some VCDs that support PBC may not use all of the
PBC functions supported by the RDV-1.1.
Priority Contents
This setting determines what is played when a
DVD-Audio disc also contains DVD-Video material.
DVD-AUDIO (default)
The DVD-Audio material is played.
DVD-VIDEO
The DVD-Video material is played.
Auto power off
The Auto power off function automatically turns off the
RDV-1.1 after 20 minutes of inactivity.
Off (default)
Auto power off function off.
On
Auto power off function on.
This menu appears automatically the very first time the
RDV-1.1 is turned on. See “First Time Setup” on
page 44 for more information.
This section explains how to select other languages for
disc menus, audio, and subtitles. It should be used in
conjunction with the Language settings on page 82.
Initial Setup Menu
DVD-V DVD-A
VCD
DVD-A
Selecting Other Languages
1 Select Others from the Disc Menu
Language, Audio Language, or
Subtitle Language menu, and
then press [Enter].
The language code boxes appear.
2 Use the Left and Right [ ]/[ ]
buttons to select the code boxes,
and use the Up and Down [
]/
[ ] buttons to enter a language
code.
See the table below for language codes.
3 When you’ve finished, press
[Enter].
Remote controller
Enter
Enter
Remote controller
Remote controller
Enter