Getting to know the rdv-1.1 —continued, Rear panel, See page 20 for the european model – Integra RDV-1.1 User Manual
Page 18: And can be connected to the i.link, On a
18
Getting to Know the RDV-1.1
—Continued
M
Chapter & track number
Chapter and track numbers appears here.
N
Time display
Time information, such as total time, remaining
time, and so on, is displayed here in hours, minutes,
and seconds. Other messages are also displayed.
O
JPEG indicator
This indicator appears while a JPEG picture is being
displayed.
P
MP3 indicator
This indicator appears when playing an MP3 track.
Q
Dolby Digital (
D), Dolby Pro Logic
(
PL) & DTS (
) indicators
The Dolby Digital indicator (
D) appears when
a Dolby Digital soundtrack is selected. The Dolby
Pro Logic (
PL) indicator appears when the
RDV-1.1’s Dolby Pro Logic decoder is on. The
DTS indicator appears when a DTS soundtrack is
selected.
R
DVD-AUDIO & SACD VCD indicators
These indicators show the type of disc loaded.
DVD:
DVD-Video, DVD-VR
DVD-AUDIO:
DVD-Audio
SACD:
Super Audio CD
VCD:
Video CD
CD:
Audio CD, MP3, JPEG
See page 20 for the European model.
For detailed information, refer to the pages in parenthesis.
A
i.LINK S400 (AUDIO) (34)
These sockets can output up to
six channels and up
to 192 kHz/24-bit digital audio in
i.LINK format
and can be connected to the i.LINK
sockets
on a
compatible AV receiver or other component. The
actual output signal depends on the disc currently
playing. Since
i.LINK is a bidirectional connec-
tion, connected components can talk to each
other for optimal setup and perfectly synchro-
nized audio transmission.
B
RS 232
This bidirectional RS-232 port can be connected to
an external controller.
C
HDMI OUT (32)
This HDMI socket outputs digital video and audio
and can be connected to an HDMI input on a com-
patible TV or other component.
When the video input source is set to HDMI, the
signals received by the HDMI IN are output here.
D
HDMI IN (32, 40)
This input accepts HDMI digital video and audio
and can be connected to an HDMI output on a com-
patible AV receiver or other component.
When the video input source is set to HDMI, video
signals received here are output by the HDMI OUT.
E
VIDEO IN component (Y, P
R
, P
B
) (39)
This input accepts both SD and HD component
video and it can be connected to a component video
output on a TV or other video component.
When an SD component video signal is input, it’s
upconverted to progressive video and output by the
HD VIDEO OUT COMPONENT 1 and 2 outputs.
When an HD component video signal is input, it’s
output by the HD VIDEO OUT COMPONENT 1
output at the same resolution.
Rear Panel
COAXIAL
OPTICAL
OPTICAL
COAXIAL
DIGITAL
1
DIGITAL
2
DIGITAL 2
( BALANCED)
AES/EBU
AUDIO OUT
MODEL NO.
RDV-
1.1
DVD PLAYER
AC INLET
D. MIX
FRONT
SURR
1
CENTER
SURR
2
L
R
L
R
IN
SUB
WOOFER
1
2
Y
P
B
P
R
OUT
OUT
IN
REMOTE
CONTROL
VIDEO OUT
COMPONENT
VIDEO
S VIDEO
VIDEO
S VIDEO
Y
P
B
P
R
Y
P
B
P
R
IN
1
+
2
1
RS
232
HDMI
VIDEO IN
IR
S400
( AUDIO)
AUDIO OUT
HD VIDEO OUT
COMPONENT
12V
TRIGGER
SURR MODE
(AUDIO OUT)
P
F
G
K
M
U
V
Q
O
N
E
H
I
J
1 BC D
L
R
S T