Integra RDV-1.1 - Manual (Page 40)

40
Connecting —Continued
The RDV-1.1 has an HDMI IN socket, so you can con-
nect another HDMI-compatible component, such as an
AV receiver. When the video input source on the
RDV-1.1 is set HDMI (see page 67), signals received by
the HDMI IN are fed through to the HDMI OUT.
Notes:
• The RDV-1.1 supports HDCP (High-bandwidth Digi-
tal Content Protection), a protection system for digital
video. HDMI components that you connect to the
RDV-1.1 must also support HDCP.
• The RDV-1.1 supports High-Definition Multimedia
Interface Specification Information Version 1.0.
With (Remote Interactive) you can control the
RDV-1.1 by using the remote controller supplied with
your Integra RESEARCH
-compatible AV receiver.
Notes:
• Push the plugs in all the way to make a good connec-
tion.
• Use only cables for connections.
• To use you must make an analog audio connec-
tion (RCA) between the RDV-1.1 and Integra
RESEARCH AV receiver, even if they are already
connected digitally.
• The RDV-1.1 has two sockets. You can connect
either one to the Integra RESEARCH AV receiver. The
other socket is for connecting additional
-compat-
ible components.
• Connect the RDV-1.1’s socket to only Integra
RESEARCH components. Connecting to other manu-
facturer’s components may cause them to malfunc-
tion.
P. Connecting a Component with an
HDMI Output
COAXIAL OPTICAL OPTICAL COAXIAL
DIGITAL 1 DIGITAL 2
DIGITAL 2 ( BALANCED)
AES/EBU
AUDIO OUT D. MIX FRONT SURR 1 CENTER SURR 2
L
R
L
R
IN
SUB
WOOFER
1
2
Y P B P R
OUT
OUT
IN
REMOTE CONTROL
VIDEO OUT COMPONENT
VIDEO S VIDEO VIDEO
S VIDEO
Y
P B
P R
Y
P B
P R
IN
1+ 2 1
RS 232 HDMI VIDEO IN IR
S400 ( AUDIO)
AUDIO OUT
HD VIDEO OUT COMPONENT
12 V TRIGGER
SURR MODE (AUDIO OUT)
IN
HDMI
HDMI
OUT
AV receiver, etc.
Signal flow
Connecting Components with
COAXIAL OPTICAL OPTICAL COAXIAL
DIGITAL 1 DIGITAL 2
DIGITAL 2 ( BALANCED)
AES/EBU
AUDIO OUT D. MIX FRONT SURR 1 CENTER SURR 2
L
R
L
R
IN
SUB
WOOFER
1
2
Y P B P R
OUT
OUT
IN
REMOTE CONTROL
VIDEO OUT
COMPONENT
VIDEO S VIDEO VIDEO
S VIDEO
Y
P B
P R
Y
P B
P R
IN
1+ 2 1
RS 232 HDMI VIDEO IN IR
S400 ( AUDIO)
AUDIO OUT
HD VIDEO OUT
COMPONENT
12 V TRIGGER
SURR MODE (AUDIO OUT)
OPTICAL
DIGITAL IN
OPTICAL
R
L
D. MIX
L
R
AUDIO OUT
AUDIO IN
REMOTE
CONTROL
REMOTE
CONTROL
Integra RESEARCH AV receiver
To use you must
make an analog audio
connection (RCA)
between the RDV-1.1
and the other compo-
nent even if they are
already connected dig-
itally.
cable
(supplied)